MEASUREMENT TOOLS - Thermometers

Computemp Optional Equipment

Please note these sensors can only be used if you have an existing Computemp recording thermometer listed on the previous page Computemp

• Ambient Air Sensor

  With the ambient air sensor you can monitor indoor and outdoor temperatures with ease. With various lengths available you can monitor temperatures in your greenhouse, garden, orchard, storage buildings, confinement buildings and more. Select the probe length that most accurately reflects your needs.

• Pipe Type Sensors

  If your application requires monitoring water temperatures on one or more channels, you may want the pipe type sensors. The sensor with its clamp attachment must be placed on the appropriate pipe that leads to or away from your pool, spa, hot tub or solar application. Two sizes of clamps are available, for small and large pipes. Sensors are available up to 1000 feet.

• Stainless Steel Mass Sensors

  When you want to monitor soil or other loose bulk temperatures, the mass probe will do the job accurately and reliably. Insert the 1/4" diameter 8" long sensor into the mass that you wish to monitor and the readings will appear on your Computemp, enabling you to keep an easy check on temperatures in aquariums, hay bales, or compost piles. The mass probe is stainless steel so it also can safely monitor food temperatures. Sensors are available up to 1000 feet.

• Wine Temperature Sensors

  This sensor is a must for people with discerning wine tastes. Place the coated, sensor with it's attached cork in the neck of any water-filled wine bottle- the Computemp will then tell you the exact temperature of the wine in your wine cellar. And when you set your Computemp temperature alarm you'll be able to enjoy the full flavor of your favorite wine at its correct temperature. Sensors are available up to 1000 feet.

• Rotary Switch Module

  You may add up to seven additional sensors to your Computemp which can monitor a variety of temperature readings in several locations. With this easy to install, plug-in rotary switch module you can adapt your Computemp to monitor temperatures of air, liquid or mass. No additional parts are needed, simply disconnect one of your sensor wires and plug the module in the main or aux. port of your Computemp.